Tinker's dam & cuss
Posted by James Briggs on February 07, 2002
In Reply to: Tinker's dam posted by ESC on February 07, 2002
: : What I learned from my daddy, almost seventy years ago, was
that a "tinker's dam" was a small piecd of clay to hold the solder
on a pan until the solder cooled and set.
: : You would not make a dam out of solder. It is what you melt to mend or tie something together either mechanically or to make a good electrical connection.
: : At least you did not write that it was the "profane language"
of the lowly tinker. Heck, he had to be a craftsman to do his work.
: : Thanks for the link.
: That sounds like a good explanation to me.
If someone doesn't give a tinker's dam (or cuss) the they are reckoned to be completely indifferent to the outcome of an event. Dam (note the lack of a terminal "n") is used today to describe a structure for holding back water; so it was in the days of Tinkers. They used to travel the country earning their livings mending pots and pans and sharpening knives. They would mend the pots by filling the leak on the inside with some clay and then repairing the outside with permanent material. When this was done the clay was discarded. The clay stopper was the tinker's dam. The dam was also known as a cuss. Both were worthless, hence the saying.